UK system help
 
Notifications
Clear all

UK system help

8 Posts
7 Users
0 Reactions
2,903 Views
Posts: 9
Topic starter
(@martin-uk)
Active Member
Joined: 16 years ago
[#13742]

Hi
Hopefully someone can help me, I have seen what you are doing over there with your Christmas lights and I love it, I have been using sound to light units over here for years but these are nowhere near what you are doing, (now the help bit) I cannot find anything in the UK like the systems you are using, I have E-mailed light o rama on several occasions but they don’t appear to want to talk too much, can any of you suggest a system that will run on 240v and a supplier that may ship the computer interface hardware to the UK? I think I would like to start with about 128 channels.
I don’t mind a limited build but my electrical knowledge does not run to fully building a system, Cheers in advance and happy holidays from the UK
Regards Martin
😀


7 Replies
Posts: 1
(@jon-tokyo)
New Member
Joined: 16 years ago

Martin

Hi, I also had the same sort of query. I live in Japan, dont use musical lighting yet but man cannot wait to learn 😀

But we run on 100Volts and I worry about the 110 volt systems not timing properly.

For example if you get a 110 clock and bring to Japan plug it in, it will turn on sure, but say 3 days later, the time is completely off.

My best idea was to get a converter, that way even for you from 240 to 110, it will convert it down. Possibly the easiest option, as allot of things from the states wont work in 240V or for me 100V.

Hope it helps.
Jon


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
First, welcome to DIYC and Merry Christmas.

You will find that our "down-under" friends have a lot of experience and expertise in the 240 volt equipment and how to use it. I'm sure there are many of them who will be replying to your post. Also, we have some DIYCers in Europe that check in, so you're not alone.

Second: You can do more than you think you can. There are a good many people who started here and who didn't know a resistor from a cup of tea, but they have read and asked questions and have constructed very large, successful displays.

Don't be afraid to ask for help or opinion. You will never be "put down" on this forum.

Good luck and please join the fun.


Reply
Posts: 556
 jpb
(@jpb)
Honorable Member
Joined: 19 years ago

Martin,

Most of the controllers run on 5 or 12V DC. You just need an appropriate power supply or transformer to convert your mains voltage. A lot of people actually tap this off their show computer power supply.
You may need to need to change the value of a couple of resistors on your SSRs to accomodate the voltage that your lights run depending whether they run at main voltage or from a plug pack.

This possibly sounds double dutch at the moment but have a read of the Wiki and the forums, especially on the Grinch and Renard bits and you will understand how the controllers work and why main voltage is immaterial. Also have read about SSRs, these are the bits that actually turn the lights on and off.

Once you have an rough understanding of how it all works you can then decide how you want to build your system and what equipment to use. You have 11 months before you turn your lights on but I would recomend that you get some of your gear in the 1st half of the year so that you have plenty of time to play and learn.

and as IdunBenhad said, don't be afraid to ask questions.

Jon


Reply
Posts: 9
Topic starter
(@martin-uk)
Active Member
Joined: 16 years ago

Cheers for the responses, I have found the website and Wiki most useful and I am having a re think on how to build the system, there will be definitely more questions coming soon.
Regards Martin


Reply
Posts: 13
(@janebullivant)
Active Member
Joined: 17 years ago

I'm in the same situation as you Martin - I'm in Cornwall, UK and have just started my first setup! Have been reading for ages but got to the state where I was so confused that I just need to start DOING!

Have fun

Jane


Reply
Posts: 159
(@artzy)
Estimable Member
Joined: 18 years ago

Hi Martin

Welcome to DIYC. With the help of wjohn (a very very wise man), I built a Ren 16 (xmus) that I use to run 240v rope lights etc. here. If you PM wjohn he will probably be able to give you some guidance.

Paul


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
jon_tokyo wrote:But we run on 100Volts and I worry about the 110 volt systems not timing properly.

For example if you get a 110 clock and bring to Japan plug it in, it will turn on sure, but say 3 days later, the time is completely off.

With regards to the timing itself, the Renard-style controllers keep time based on when the voltage changes polarity (120x/sec for 60 Hz in North America, 100x/sec for 50 Hz in the U.K.). If your AC frequency is either 50 Hz or 60 Hz, then the overall timing would be okay (as long as you choose the correct version of firmware).

A different voltage might require lower or higher resistor values in your SSRs, but that's more of a voltage/power issue than timing itself. The triacs themselves will turn on at considerably lower voltage than 100V, so there's a lot of room for adjustments - you could probably make minor adjustments if it even turns out to be a problem.

I guess what I'm trying to say is, don't let a technical issue such as a different voltage prevent you from exploring the wonderful world of Christmas light sequencing without even giving it a try. If you want to give it a try and have some electrical knowledge regarding safety and how the circuits are supposed to work so that you could make adjustments, this is a DIY forum and there are a lot of people here that could help you work through any issues.

don


Reply
Share: