Hoping for some creative suggestions from y'all:
Last year we built two "half-hexagon" trees (not our idea originally, but I forget whose it was) that are 10+ feet tall, with 3600 lights (red, green, blue, white incan. minis organized into 9 panels), which allows for really neato patchwork effects as seen below:

(full video at http://xmas.sylmicro.com )
The high winds and weather have not been kind to them -- the wood frames are cracked and the blues have weathered to near-green. SO -- I need to "remake" them for next year.
Here's where I'm hoping for advice...
Since I'm remaking them anyway, I was thinking of going with RGB LEDs, for simplicity's sake
(so I can stop digging through 3600 lights to find the "one" that brought the whole thing down, to lessen the amperage, to avoid the blue-light-fadey thing, etc.)
and some other forums talk of DMX-addressable RGB strings.
Is it worth it, (power, $$$, time) to pursue RGB at this time, or am I better off replacing the blues and just sticking with incands?
I welcome any and all input!!!
well i cant give you advice in the DMX department or the annoying fading light color, it happens to all the colors eventually, but i can help you out on the lights burning out problem (if i herd you correctly). They make a light striker thats hand held that is at places like Walmart, selling for around 20 bucks. you connect it to any of the lights that are not lit. squeeze the trigger and it will light all the lights that are not burnt out. if you see any that aren't lit then it is truly burnt out....its that simple. no need to go through all the lights....i would take extra precautions in disconnecting the power cords from your controllers just in case when using it
griffixdc wrote:well i cant give you advice in the DMX department or the annoying fading light color, it happens to all the colors eventually, but i can help you out on the lights burning out problem (if i herd you correctly). They make a light striker thats hand held that is at places like Walmart, selling for around 20 bucks. you connect it to any of the lights that are not lit. squeeze the trigger and it will light all the lights that are not burnt out. if you see any that aren't lit then it is truly burnt out....its that simple. no need to go through all the lights....i would take extra precautions in disconnecting the power cords from your controllers just in case when using it
That's not how the Light Keeper Pro works. When you pull the trigger, it produces a shaped electrical pulse on the strand that hopefully causes the shunt in a burned out bulb that did not shunt properly to shunt, thereby restoring continuity to the string so when you plug it back in the AC outlet, all the good lights light as they should. The LKP will not power the string.
Truthfully, I never had any luck using the pulse generator. The best thing about the LKP IMO is the inductive pickup at the tip. Push the button at the back of the LKP, start going down the string, stop when it stops beeping, and start checking the bulbs around the area where it stopped beeping. With a little practice, you can find the bad bulbs pretty quickly.
The LED's in your link say "mainly for indoor use". I suppose someone could figure out how to weather proof them, but that may be a challenge. If it were me, I would go with the addressable RGB strips. The initial cost make it unrealistic for me right now, but I keep imagining the possibilities. If it were me, I would just replace the minis and wait a little while to see what happens in the future.
I believe griffixcd is talking about a LKP. They are a super time saver, but the "click and fix" method rarely works. I've been using mine for 3 years, and have fixed hundreds of light strings, and not once has it fixed a bulb with a bad shunt. The voltage detection feature works very well, and it's all I ever use. I keep telling myself I'm not getting a buzz box because I'm going to switch over to all LED's, but really that won't be happening for a while, so maybe this year's the year.
asylvest wrote:Hoping for some creative suggestions from y'all:Last year we built two "half-hexagon" trees (not our idea originally, but I forget whose it was) that are 10+ feet tall, with 3600 lights (red, green, blue, white incan. minis organized into 9 panels), which allows for really neato patchwork effects as seen below:
(full video at http://xmas.sylmicro.com )The high winds and weather have not been kind to them -- the wood frames are cracked and the blues have weathered to near-green. SO -- I need to "remake" them for next year.
Here's where I'm hoping for advice...
Since I'm remaking them anyway, I was thinking of going with RGB LEDs, for simplicity's sake
(so I can stop digging through 3600 lights to find the "one" that brought the whole thing down, to lessen the amperage, to avoid the blue-light-fadey thing, etc.)and some other forums talk of DMX-addressable RGB strings.
Is it worth it, (power, $$$, time) to pursue RGB at this time, or am I better off replacing the blues and just sticking with incands?
I welcome any and all input!!!
That looks like non-individually controllable strip, which is one of the cheaper ways to do RGB. I don't think many people here use strips though, due to the form factor not being too "christmas-y".
Similar to the strips are some DIY strands that aussiephil and fathead45 have been working on, using ribbon cable, 5050 SMD emitters, and some faceted covers fathead45 found. However these are work-intensive to build.
There are also the individually-controllable strands - none of them speak DMX directly but many have made DMX bridges for them. Most of these are Asian imports from aliexpress - domestic sources (more expensive but probably more reliable) are GE's Color Effects strands and mrpackethead/JEC's pixel strands.
The other (and easiest for you) option is classic-style LED strands. These are much more durable in general than incans, and the colors don't fade. Cheaper ones have the potential for corrosion depending on your environment - many here swear by the sealed strands from Creative Displays, who is starting their preorder for next year right around now.
