This is great looking project.
The more and more progress is made with these sorts of projects, the more I'm convinced DMX/E1.31 will be less relied on for high channel count displays.
I'm currently wondering what could be done by combining a Raspberry Pi with http://www.pjrc.com/teensy/td_libs_OctoWS2811.html
What are you using to drive the transmitter? Meaning, what is driving the sequence?
-P
Zeph wrote:
Will you be releasing the schematic and board design?
Sorry, I forgot all the wacko routing business in iis7 and gave up after about 5 min getting the links to work so i updated them to use github
ptone wrote:
I'm currently wondering what could be done by combining a Raspberry Pi with http://www.pjrc.com/teensy/td_libs_OctoWS2811.htmlWhat are you using to drive the transmitter? Meaning, what is driving the sequence?
-P
I am still working on a robust transmitter. My first attempt was mildly successful using the 328 processor and the ENC28J60 Ethernet. I got it to work, but only for a few minutes. I am still using it in development to test the receivers.
as far as working ones
Currently there is an FTDI and E1.31 that work for joe's RF_Color and can also be used on this.
you can download the code from my github channel. Its all opensource. Hardware & Software. Feel free to use the software, mix it etc. Hardware too. I know we will find issues with the layout (reset button too close) that can be fixed. If you plan on enhancements, let me know and ill try to add them. Bugs? Github too, for the hardware and software.
For testing the board I have been using this code. https://github.com/komby/RFPixelControl/tree/master/Examples/WS2801Receiver
I am pretty sure I can get the FastSPI working also. The only catch with it is that I probably should have split the data and clk on two different ports. currently on the same oen.
komby wrote:So fornow its using 21 of the 28 pins.
I forgot about the nRF23L01 taking a handful of pins. I'm used to my wired solution that have the UART Rx line, a data line, and maybe a clock line. I forgot about the RF's SPI lines that are needed. You can probably only pare down a little bit that might not be worth the tiny savings for a much less "standard" atmega.
Very interested in seeing where this heads - I have a potential "project" that this would work out for. I am looking to have a master DMX/E131 controller setup - and have 10-15 "mobile" units that need to receive the signal. The goal is to have each unit with 150 pixels on each unit. As of right now - I plan on each unit to play the same pixel data.
