New Single String P...
 
Notifications
Clear all

New Single String Pixel controller

85 Posts
15 Users
0 Reactions
32.9 K Views
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago

Yippee! http://youtu.be/YtX4IXllS_I

One string of wm2999
One string of ws8201 using RF1 5v (fast spi2 rc1)

One string of ws8201 using RF1_12v * (fast spi2 rc1)

*the 12 v board is powered by 12v but the pixel power is 5v because I don't have any 12v pixels yet.

Also got the dumb rgb expansion board running off of the 12v board

All in all a pretty productive night!
Ill release the fast spi sketch tomorrow.


Reply
Posts: 47
(@folny)
Eminent Member
Joined: 15 years ago

Hi Komby

Yes TestRFTransmitter sketch working and SM16716 Pixels working with the FastSPI_LED2Receiver and I have worked well WM2999Transmitter does not work properly only code LPD6803Receiver.


Reply
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago

New Updates to the RFPixel Control lib.
https://github.com/komby/RFPixelControl/tree/master/Examples/FastSPI_LED2ReceiverRCVersion

This version uses the new FastSPI_LED2 Release candidate library and its cool!


Reply
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago
folny wrote:Hi Komby

Yes TestRFTransmitter sketch working and SM16716 Pixels working with the FastSPI_LED2Receiver and I have worked well WM2999Transmitter does not work properly only code LPD6803Receiver.

I have updated/removed the WM2999 transmitter.
I renamed it to FTDITransmitter https://github.com/komby/RFPixelControl/tree/master/Examples/FTDITransmitter

Also Uploaded a new (very beta ) E1.31 transmitter based on Arduino Ethernet(wiznet) Unicast Transmitter.
https://github.com/komby/RFPixelControl/tree/master/Examples/ArduinoEthernetSheidUnicastE1_31Transmitter_ino


Reply
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago
komby wrote:Yippee! http://youtu.be/YtX4IXllS_I

One string of wm2999
One string of ws8201 using RF1 5v (fast spi2 rc1)

One string of ws8201 using RF1_12v * (fast spi2 rc1)

*the 12 v board is powered by 12v but the pixel power is 5v because I don't have any 12v pixels yet.

Also got the dumb rgb expansion board running off of the 12v board

All in all a pretty productive night!
Ill release the fast spi sketch tomorrow.

An update, I finally ordered my pixels and was able to test the RF1_12V with actual12V pixels! No surprises there it worked great. Still working on updates to the libraries and will be putting out public beta of the over the air configuration control, also renard based serial transmitter code next week!


Reply
Page 17 / 17
Share: