New Single String P...
 
Notifications
Clear all

New Single String Pixel controller

85 Posts
15 Users
0 Reactions
32.9 K Views
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago

do you know what was not working?

What are you using for your transmitter? I would suggest not using the FTDI transmitter while debugging. Use https://github.com/komby/RFPixelControl/blob/master/Examples/TestRFTransmitter/TestRFTransmitter.ino

it will broadcast a continuous stream of data without worrying about the transmitter. to use that library you will not need to modify anything.

now, assuming you have a known working transmitter
You do not need to modify RF24.cpp to use any of my code. The RFPixelControl library handles the RF hack for you.

You do not need to modify Hardwareserial.cpp for receiver code. you would only modify it if trying to use the FTDI transmitter.


Reply
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago

Look what showed up today 😉

RF1 5v revised
RF1 12V
RF1 reset breakout

And the dumb rgb controller ... Just finished building em! Now lets see if they work!!!

ImageUploadedByTapatalk1370326363.606585

Reply
gunther
Posts: 61
(@gunther)
Trusted Member
Joined: 17 years ago

Nice. Looking forward to giving these a spin.


Reply
Posts: 47
(@folny)
Eminent Member
Joined: 15 years ago

Hi

First I tried your code FastSPI_LED2Receiver with SM16716 pixels to work correctly with FTDI well TestRFTransmitter but LPD6803Receiver code does not work right colors R, G and go along brightness control also does not work properly. I have one question DMXSerial.h which library should I use for the compressed WM2999Transmitter_3_6_2013_Beta because I'm still throws an error I use Arduino 1.0


Reply
komby
Posts: 871
Topic starter
(@komby)
Prominent Member
Joined: 14 years ago

ok, to clarify

You were able to get the TestRFTransmitter sketch working?
You were able to get SM16716 Pixels working with the FastSPI_LED2Receiver?

I will look at the LPD6803 again, its a bit different from the other 8 bit pixels so I may have missed some stuff.

If you found DMXSerial.h in the WM2999Transmitter sketch I made a mistake.
At one point I was attempting to modify the WM2999Transmitter to use DMXSerial so that we wouldnt have to modify HardwareSerial.cpp. I gave up on that, so anyone using FTDI will still have HardwareSerial.cpp changes to make. Ill double check the wm2999Transmitter and get back to verify.


Reply
Page 16 / 17
Share: