led sequencer
 
Notifications
Clear all

led sequencer

4 Posts
2 Users
0 Reactions
2,404 Views
Posts: 9
Topic starter
(@mmlabs)
Active Member
Joined: 13 years ago
[#28480]

hi all,ive got a second project i opted to do this year,we have a (suppose to be sequenced) incandecent firework display that is about 20 years old asnd needs revamped,..im wanting to switch to leds and have each led addressable ,the fireworks are suppose to start at the bottom,shoot up and pop,the way it was wired before the whole bar would light at one time and doesnt give as good an effect as it would if each led turned on seperate,..

so what im looking for is a stand alone plug and play programmable RGB led dimmer and sequencer,..any ideas


3 Replies
Posts: 9
Topic starter
(@mmlabs)
Active Member
Joined: 13 years ago
DSCN0116

Reply
Posts: 39
(@joyangel)
Eminent Member
Joined: 19 years ago

I don't know if you know how to program an ardunio but you could use ws2811 pixel leds and use the NeoPixel driver running on an ardunio but you would have to program the effects yourself.


Reply
Posts: 9
Topic starter
(@mmlabs)
Active Member
Joined: 13 years ago

ive done some coding here and there (mainly with minecraft) .how many of those leds could I address with one arduino, because ive been drawing up a netlight of sorts that I could do the fireworks on and put in images(say framed chicken fence with the holes full of pixels).would ledtriks be better for that sort of thing


Reply
Share: