anyone using mega with ethernet shield that has a working version of the code for relays and Vixen?
Hi, @mojuave1.
I have been working on some similar. Please, take a look to the links below.
Here copy of the link that guides us to use the extra Arduino parts in hand.
https://www.instructables.com/id/Computer-Controlled-Christmas-Lights-With-Arduino/
The links below show the original IDE development used by Todd Hammond on the instructable.
https://bitbucket.org/keithsw1111/arduinodmxws2811/src/master/
I have many compiling errors to debug on my end, probably due to libraries newer versions or things along those lines. I hope you have better luck and get it running promptly. The author is part of the forum but I have no time to post questions or my issues yet.
Hope this helps, Good Luck!
Hi, I have code for 16 channels (no dimming in this version anyway) that was written for a Nano and ENC28J60 Ethernet shield. It shouldn’t be far off for the Mega.
Link (the second post is above it): https://www.diychristmas.org/vb1/showthread.php?8146-1-universe-170-pixel-(WS2811)-controller-E1-31-over-cable-(cat5)-not-wireless&p=91147&viewfull=1#post91147
If you need any help shout up.
or try the code in this thread - http://doityourselfchristmas.com/forums/showthread.php?51241-Arduino-with-Ethernet-shield&highlight=arduino+ethernet
Arduino: 1.8.10 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
new:47:23: error: unable to find numeric literal operator 'operator""B'
byte mac[] = {04, 15, 2B, D6, 54, CA};
^~
new:47:27: error: 'D6' was not declared in this scope
byte mac[] = {04, 15, 2B, D6, 54, CA};
^~
C:\Users\awarm\Documents\Arduino
ew
ew.ino:47:27: note: suggested alternative: 'A6'
byte mac[] = {04, 15, 2B, D6, 54, CA};
^~
A6
new:47:35: error: 'CA' was not declared in this scope
byte mac[] = {04, 15, 2B, D6, 54, CA};
^~
Multiple libraries were found for "SPI.h"
Used: C:\Program
Multiple libraries were found for "Ethernet.h"
Used: C:\Program
exit status 1
unable to find numeric literal operator 'operator""B'
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
those were the errors I got
