How are you mounting these? (You toss the green base, right?)
Aurbo99 wrote:If you remove the battery components and led light "tower" and switch, you can drill/cut/enlarge the hole where the tower was to fit the...
The easy conversion of the original RBL (cut off the plastic bulb mount and screw an amusement park dome through the hole) won't work on these battery...
Interesting LED strings, I haven't noticed that style of LED string wiring here in the US (but who knows). Maybe they don't worry about 110VAC safety...
I'm having another problem with an ESPixelStick - it comes up responsive about half the time when I power on each evening. If I power cycle a few tim...
MartinMueller2003 wrote:You need to be consistent. Either multicast or unicast at both ends. Does checking the Multicast box on the ESPixelStick cau...
JLStout wrote:Everything I have read on here says don't use Unicast for pixel sticks. I have 25 running in my show, all Multicast. Only lags I have ...
jchuchla wrote:Why would you think you want omnidirectional? Isn't your whole show in front of your house? Are you planning on putting the AP right ...
As a tip, each WS281x (or equivalent) pixel takes 30 uS of serial data (24 bits of color @ 800Kbps). So 600 pixels in one daisy chain will take about...
OK, so I did some smaller scale testing with my home router/ap, and now I need to get a dedicated AP because it doesn't connect well enough to some ES...
XmasinVancouver wrote: how they are connecting the power injection wire to the the existing pixel power wire? Are they just stripping a section of i...
Small question about terminology. My understanding is that in our context, a pigtail is the loose wires end, that you need to solder/crimp/screw to s...
Thanks for the reccomendations so far! Super Lube seems to be a brand. Any recommendations as to the best specific product for our DIY uses? Here...
