All boards are checked and ready to go! I was thinking $ 70.00 on the SS16 and $50.00 on SS8. I have 3 SS16 and 2 SS8. These are board only no pigta...
I had the same issue last year. I could get it to blink but the timing was off and the elements were random. I ended up running off the usb port on my...
A lot of members use Paypal, you can send money to someone without any issues. Items can be sent to you and both parties are protected. I've used the...
I have 3 from about 5 yrs ago. They haven't been used the last two years. If your interested I'll check them to make sure their working correctly. He...
I have a couple of Renard SS16 and 8's that I could part with how many do you need ?
The strings your looking at from Ray are 3-wire on the main run but have a forth wire along each drop to the next string. They have a pre-wired connec...
The strings your looking at from Ray are 3-wire on the main run but have a forth wire along each drop to the next string. They have a pre-wired connec...
I have 9 sets across my roofline. They were new this year , I really like them and the effects are great. the only thing about them is they are a bit ...
I've been on this site for 9 years and have been a supporting member since the start. The site has been invaluble to this hobby . The help and informa...
Just an update. After re-numbering all the pixels in the display layout it worked fine. I learned something new about pixels and Vixen. Many thanks to...
I had a similar problem last year with running SS Renards from the F16v3 off the dmx connectors. It would work in test mode but sequences would not w...
It looks like the numbering on the display pixels counts are off and I forgot to add the additional strand I needed in the front! I still need to fini...
Not confusing at all , I haven't checked that yet . I kept thinking I had a patching problem so you may be on to something! I'll check it tonight.
Brian, Can you give me an example of what I should be looking for ? I'll have to check them when I get home from work, But I think they're setup as o...
Vixen 3.4.5 , going to a FPP then to a Falcon F16V3. I have also run this with only the laptop and the F16V3 with the same results.
