I have 20 bare PCBs in stock.
i have them in stock, will drop you a PM, John.
i have two REN24s (franks) in CG1500 cases at the base of my Megatree. The boxes are thick cable tied to the pole and cable tied on the covers to sto...
Triac based boards won't work for DC as described above. There are DC controller boards and DC SSRs all based on MOSFETs
The main issue is the temp ratings of the parts on the board. Electrolytic caps will be the most temp sensitive.
Email sent.
It sounds like you may have missed soldering a pad. While reflowing all joints is a good idea, get another family member to look for pads that look s...
Remove the board from the enclosure, take it inside and sit it near a heating vent and let it dry out 100 %, take the ICs out of the sockets, if you c...
SSRez is 2oz copper, as long as you have decent heatsinks you can run the channels at 2 amps, for a maximum of 7 amps for the board. I have always sp...
Second version pcb.
Hi As you have less than 512 channels, I assume channel 1 in Vixen is allocation to channel 1 in Dmx. You can pump 512 channels out to the Enttec d...
I do have the Docs still, I'll post them to my website and link back to here. all the info is in the wiki
Check with Phil, but I think that is in the Renard code not he plug in
You will notice many boards have 0.1 uF caps located near each IC.
