Hi, sorry for the delay but I had to work o/t and I just got home. My flood lights are 10w ws2811 they are about 5 ft from my px1 controller. Here are...
Thanks MrSmoofy for your reply and idea, once i get home, I'll do it. Sent from my SM-G900V using Tapatalk
Great Sent from my SM-G900V using Tapatalk
Thanks jerry for your help Sent from my SM-G900V using Tapatalk
Thanks jerry, I'm planning to build one but I'm not sure where to start. Which control are u using with it and where did you get it from. Also, you h...
HI jerry, where did you buy your p10 panels Sent from my SM-G900V using Tapatalk
Great job, thanks Sent from my SM-G900V using Tapatalk
Hi heldwhat, yes I tried, but didn't work, they may be fried. Sent from my SM-G900V using Tapatalk
Martin, Keith and dirknerkle, hopping you the best holyday. Just to inform you that the problem I had with my PX1, was the ic pic. I swap it as you re...
Hi Keith and Martin, I don't know if I explained this correct or not, but when I check the voltage from the regulator, I get from the input 5.5volts ...
Hi Keith R, thanks for your help, I did check it as you said, and I got from input 5.5v but from output only 0.10v. This mean that is not good, right?...
Hi Martin and Dirknerkle, Thanks for your help. I checked the voltage out of the regulator. I checked from the right to the middle leg and I got 4.5v...
