Suction cups for the win.
Updating with a picture of the mounts attached. Works perfectly!
Update, I just soldered a 18 AWG insulated wire to 'E', about 3.5 feet. Taped it to a 4 foot wooden dowel. Worked awesome. Easy!
Built this. Going to put 4 on each one. I'll take more pics and update.
kev wrote:Yes, the white cable provides power and data to the first pixel. The first green lead feeds the ESPixelstick and then the other green leads...
aknflyer wrote:I 3d printed a case for mine back when I used those. You can also have someone else print it on thingiverse if you dont own a printer. ...
kev wrote:Yes, you are at risk of pulling 15A for the first 250 pixels. I would suggest power injection at a lesser number of pixels, like 100. You ...
Question: Do you need another fuse between the PSU and your controller? I see some folks using these between the PSU and the controller (and between...
It was my channel setup, and a basic step using XLights. Basically RTFM. Sharing my setup. I have 250 pixels connected to one output port on each ...
Randomaker wrote:A quick search of reference designators comes up with this- E - ANT, Terminal, Ferrite Bead Ring, Misc. Electrical Part So yes that ...
Just received it. There is no hole labeled 'antenna'. Any ideas? See pic.
I think my problem is with channels. I thought by going into Xlights, and setting the 'start channel' to just the controller would do it. Now I thin...
