I've never seen a MLCC catch fire, typically they fail open. That being said, they can burn open with too much voltage applied to them. Tantalum caps ...
I wasn't sure where he was located, nothing on his webpage indicated stateside or....elsewhere. I'll give it a try with the D1 and see if both output...
I'm only avoiding it (and not really avoiding) is trying to get something to test with, as it appears the only source is China, so just shipping delay...
Short answer is no on VSCode and PlatformIO. Yes its only Sept, but I don't have time to learn the process at this time (although I would be interest...
OK, sounds like its going to be easier to order a ESP32 board, being more of a hardware guy than software, creating a custom build is a bit out of my ...
I was using the web based flash tool, selected the platform "QUINLED UNO", but its telling me it does not support the ESP8266 devices (WeMOS D1). So ...
It was both and yes...I intend to make sure things line up before I power it on. Thanks for the responses.
I assumed its compatible with the WeMOS D1 (my goto IoT board) running ESpixelstick firmware. However its a 9 pin socket (btw...mine didn't have thos...
Yes, mine arrived. Just need some time to build!
I see on Ebay there is a seller with WS2814 chips, pricey at $6 each
Windows....gotta love, gotta hate. Try moving the entire directory to the root, and see if that helps. I've run across it before, and that fixes it ...
2x QuinLED Dig-Uno 1x QuinLED Dig-Quad
Perhaps a final question related to setting it up in Xlights. In the controller tab, when using DDP, do you typically uncheck the "keep channel numbe...
Just following up, I was successful in programming using the web interface, but (for me) it only works with Edge (not Firefox). Not an issue but only...
I've got a bunch of ESP8266 WeMOS D1 modules. I downloaded the version 4 code, unzipped and when I run the jar file I get a ton of missing files mess...
