Thank you for all of the work you do to support this hobby! I'll give it a go this weekend.
Sorry if that wasn't clear, the UNO is only driving 2 ports on the quad, but its driving all the pixels, not just 3 that the quad firmware is doing. ...
So here is something else interesting. I put the UNO into the quad, thinking the designer used port1 and port 2 the same on both designs, and it driv...
I checked the configuration on the module after I uploaded, and they are all set to WS2811, 50 pixels, etc. Nothing unusual there. I hit the render, ...
OK, I'll get back to that issue later, as we know the code works fine with the UNO on the other module. So trying to get the quad to work. I flashed...
I just have the default boxes (and timeouts, etc) use DHCP and AP Fallback are checked. I always program using DHCP to start, then set a static addr...
Here is a log of a failed attempt rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00...
Oh, found the problem with why Xlights wasn't talking to the Quad. In the controller setup, I had put the wrong info into the Vendor and Model, I ini...
I bought 3 of the QuinLED modules. As mentioned the first one would not appear to connect to the network with Sept23, but would for the Sept16. Seco...
Just saw your request for the logs, I'll do that this weekend for the UNO. I just fired up the quad, but having some issues that I am working through...
Does the webflasher work on a Mac? I went to use it at my BIL house, he only has a Mac, and it came up but it never asked what USB port to use, or po...
So as it turns out, DRzzz is about 50 miles to the south of me, so I ordered up 3 of the QuinLED-ESP32 modules and they arrived yesterday. Using the w...
