Put me down for the following: 1 - SSRez Parts Set $48 (8 per set) 1 - TA-200 Set $26.50 (8 per set) 1 - also need an enclosure for my Grinch but ...
I ended up ordering mine from Wjohn here on the site. To my knowledge no one made a self etch file for the SSRez. The SSR Neon is the only self etch...
I wouldn't put an attenuator in until you fix your problem! As for construction, if you followed the Wiki carefully then your antenna should work. T...
This will be my first year. I am currently populating the SSRez boards and testing everything. I am planning to use a double gang blue plastic elect...
Problem solved! Going back over everything tonight and realized that I wired the DB25 connector completely backwards! Was looking at the diagram inc...
Checked my LPT settings in the Device Manager and tried both ECP and EPP. Verified I was using 0378. Haven't had the time to shorten the cable yet. ...
Data cable is approximately 5' long, pins 18-25 are tied together to form the ground for the grinch, power is being provided via J2. Tried both Olsen...
I am following the troubleshooting guide step by step found here: Computer is a custom home build PC as I built all my PC's. Tried 3 difference PC'...
Welcome to DIYC! You may want to check here for the DMX board.
RPM, Thanks for the help. I have ordered PCBs (SSRez & Grinch) from John and should have them early next week. I have also ordered and received all ...
Most CATV coax (RG6 & RG59) use a aluminum braiding for the shield. As previously stated its solder isn't going to stick. Your best bet is to use so...
