Everything you list will work. A few questions to ask yourself for a controller. Do you plan to add on? If so how much? There are several different co...
Try electrical contact cleaner. Usually comes in a spray can at most hardware stores or home centersSent from my iPhone using Tapatalk
algerdes wrote:Things to try - 1. as stated, shorter run between controller and pixels. 2. Add either some null pixels (about every 10 feet) or ...
MikeNi wrote:I just looked at my Vast transmitter.. it has a 3.5mm input.. will the RPi 3B+ run the audio out through its own 3.5mm output jack? Sent...
Usually just the first pixel.Sent from my iPhone using Tapatalk
If it ain’t broke don’t fix it. The only concern would be is how close are you coming to the max out out of your power supplies. Even at 40%~50% you c...
Personally I think uneven pixel spacing will be noticeable unless you’re only talking 1/2” or less. If you’re going to drill pvc make sure you use a s...
I would put the power supplies and controllers where they are easily accessible. Mine are all on the ground and I power inject when I need to. If ther...
radioguy1007 wrote:I'm another Wisconsinite and experienced the same 50 MPH winds two Sundays this month. I have a welded base to my 12 foot spiral t...
curtinti wrote:Hi all, Related to this thread, I created these window frames in PVC for a pair of double windows and am using Boscoyo strip and of co...
nayrma wrote:Similar issue. Our houses are 10ft apart. If the tree falls, might hit our house, our car or worse case the neighbors house. I may get...
I’m in Wisconsin and we’ve had very windy days the last couple of weeks. Today 25-30 mph with gusts to 50. Mine is 20’ tall. 270 degree 32 100 light ...
Keep small amounts for replacements if you need to replace any.Sent from my iPad using Tapatalk
gomer23 wrote:Nevermind, I might have figured that out. Just needed to come back and look at this later ha. But I did think of another question in re...
I use 5v. Mine are set at 5.1 - 5.2. No I do not fuse the 120 line other than the breaker. I may or may not use a GFI. [emoji41]. Never had any issues...
