tomkinsong
@tomkinsong
Eminent Member
Joined: Dec 17, 2022
Topics: 7 / Replies: 14
Reply
RE: Permanent Roof LED Install and Heat Issues

I'm assuming most of you have the controllers and power supplies in closets/garage corners?

5 months ago
Forum
Reply
RE: Permanent Roof LED Install and Heat Issues

Bigger power supplies, I agree! Testing in a more accessible hot environment, for sure! Stop putting controllers in attic spaces, I'll probably have...

5 months ago
Forum
Reply
RE: Permanent Roof LED Install and Heat Issues

tfischer wrote: Do you have an interior closet or something where you can mount the controller and run the wires up through the ceiling? Worst case ...

5 months ago
Forum
Reply
RE: Permanent Roof LED Install and Heat Issues

tfischer wrote: How hot is your attic getting? Do you have good attic ventilation? The ESP32 chip itself is rated up to 125C so I don't think you're ...

5 months ago
Forum
Topic
Forum
Replies: 11
Views: 1046
Reply
RE: Populated Ports and Testing

algerdes wrote:"... using the xxx wirelessly..." is an area I don't get into. Except for some Ubiquiti bridges (Ethernet, point to multi-point) every...

4 years ago
Reply
RE: Populated Ports and Testing

algerdes wrote:In most cases the stream that is presented to a controller's output is a one-way communications. Quite literally the stream is pushed o...

4 years ago
Topic
Replies: 4
Views: 2273
Reply
RE: Connecting Falcon F48v4-NS to xLights

gingrbredman wrote:I saw the same thing the other day when I tried to attach my Falcon F16V4 to Xlights, particularly.... From the Controllers tab in...

4 years ago
Reply
RE: Tieng Negatives on Separate Power Supplies

MartinMueller2003 wrote:No it does not. You can tie the V- from the supplies together as long as the V+ from the supplies NEVER get connected to each ...

4 years ago
Reply
RE: Tieng Negatives on Separate Power Supplies

RichieNorthcott wrote:Since a local PSU's 0V may be at a very different level than your controller's PSU, it's important that they are tied together. ...

4 years ago
Reply
RE: Connecting Falcon F48v4-NS to xLights

It's worth pointing out that I have 2x PixelSticks in addition to the F48. Those DO upload the output successfully. Sent from my Pixel 6 Pro using T...

4 years ago
Reply
RE: Newbie Controller Build

Glycerine wrote:Looks great Gary! Love your pixel stick enclosures. I was just looking at some similar ones the other day. Any idea what your light...

4 years ago
Reply
RE: Connecting Falcon F48v4-NS to xLights

keithsw1111 wrote:When you click the open button in xlights does it open the controller? Sent from my iPhone using Tapatalk It does. Sent from my ...

4 years ago
Topic
Page 1 / 2