I've experienced this a few times and all were related to noise on the data line. If you have a long cable feeding the pixels then use the shortest o...
You could also use 36v power supplies. Ali Express has cheap buck converters that drop 36v to an adjustable voltage. I have 2 Meanwell LRS-350-36 po...
Randomaker wrote:I was assuming the power supply would already have all the filtering and such that I need? Its a HLK-5M05 power supply module, here i...
I want to chime in as another AC user. I run 96 channels along with pixels. When it starts to get dark, most of my incandescent lights come on as a ...
Current draw at 120v is different from rated current at 12v or 5v. For example, the LRS-350-12 supplies 29 amps at 12 volts using 348 watts. To calc...
I only use 2 circuits for about 14k pixels and 96 channels of incandescent lights. If you have a different circuit behind your house/in the garage, e...
The pixel voltage you choose is a personal decision. I run about 14,000 pixels and 96 channels of incandescent lights. I honestly don't notice a dif...
With 245 pixels on your roofline, you can put power at the beginning and end of the string and run 100%. You don’t have to inject every 100 pixels. ...
The Pi hat you linked is pretty expensive. You can get one for $9.50 US but will have to check on shipping. I assume you can get a Pi Zero locally. ...
I had a couple from DIYLEDExpress and a couple I bought from AliExpress. Both work fine but the ones designed for DIY Lighting are easier to hook up....
I'll add specs on my tree for reference. My tree is 15' using Boscoyo strips, skipping every other hole. There are 20 strands of 50 pixels each and 1...
I use a roll of stretch wrap, found in the mailing supplies at Wal Mart. I wrap the tree from top to bottom while it's upright. I also wrap garland, ...
Just remember that RAID is no substitute a backup. A better option for home storage is to have a second NAS or other device (even a PC) to back up yo...
Mine arrived on Wednesday but I was shorted 1 pig tail. I finished testing everything last night and it checks out 100%. I started testing Wednesday...
