My 3 are ordered! Thanks for doing this 🙂 Tom
Thanks friends... Just got back from watching the taping of Hot in Cleveland. I hope can stay up with Betty White when I'm 91. She started work a 9:00...
I'd be interested in the SanDevices 681 PCB what would be total cost to 92646 Thanks Tom
Some WiFi devices have a check box to allow Multicast over the WiFi.... Make sure that the option to block Multicast is enabled. Tom
Great looking effects.. What is the matrix made up with. size spacing etc... even pics Tom
I too was a bench tech in the early 80s working on wire wrapped prototypes with 4k connections 14,16 24 pin DIPs. The controller was for 14" Calcomp 2...
Here is Ralph's video of HDPE Arches using CCP pixels My HDPE 2" OD arches are made using 6809 5m flex strips 150 pixels 3 per pixel. 2.5 meter in e...
Anybody recognize the producer/director Russell Morash WGBH Boston... produces This Old House and New Yankee Workshop....
Nice.... What are the over all dimensions?
Here are the ones Timon is talking about.
This is where a flex strip shines no zip ties needed. The lay flat on the bottom facing up. I plan on clamping a rubber snubber at each end of the t...
Ralph, Looks good. Way easier than drilling lots of holes. The arch element I made last week was one of the easiest/fastest to put together. Tom
I used a pair of polarizing sunglasses with my point and shoot to help the color contrast. What are you using for sequencing? Tom
I would run them thru the tubes as they do a good job defusing the lights. Less work no holes to drill.
