Last seen: Nov 18, 2026
Sorry to hear that. From those symptoms my best guess is that the device is not successfully booting. But really hard to say without more investigatio...
Is it just always on when the board is on and not playing test tones? That is correct. When the MUSIC ON STATUS LED is illuminated it means that the...
If the LED turns off when the test tone feature is working then all is good. - Thomas
I remade a new build again on another board, but this time, the LED is staying on regardless of any input being in the jack. Thoughts? Need more inf...
Using mono,the static is there,but way less. Mono mode disables the FM pilot tone and reduces RF bandwidth (better S/N). This improves reception of ...
UPDATE: Turned off Stereo and used Mono and things seem to be ok. That is an unexpected solution. Especially since the test tones are independent o...
Thanks for the feedback. Using a RPi was my originally planned solution, but put it on hold due to availability. And being more familiar with the ESP3...
That would be a cool feature for ESP32 builds. Put music and sequence files on the SD card, connect audio amp to a DAC pin (or use I2S) and configure ...
Any good links to the external on air signs from anyone? If you want a desk top version then this LED sign looks good: For scale, this photo shows t...
Would the IRF540N work as a replacement for the IRLZ24NPbF? Not a recommended sub. The IRF540N gate threshold is 4V. The ESP32 logic high is only 3....
R1 is showing 3.2 That voltage drop across R1 is valid, but are you sure the resistor value is correct? The expected 470 ohm might have been stuffed ...
One board gone, one board left... Thanks for helping out. - Thomas
Hmmm - getting ~1.6V which i assume means I should see light....but nothing. Maybe I ordered the wrong ones.... Those LEDs should work. But the spec...
I have downloaded the new v1.1.2 release. Is there a step by step instruction on how to apply this update? PixelRadio provides instructions for loa...
I tried on windows and it won?t even compile over there, but unclear why not - it cant find pins_arduino.h for reasons I cannot explain? PlatformIO ...
