FAST tubes draw about 25mA each, so 10 would draw 250 mA and 40 would draw 1,000 mA. I would hit Goodwill or other thrift store and grab some cheap c...
If you read the manual for most breakers, this is incorrect. The rating on the breaker is the max current the breaker will positively remain on with ...
Many MP3 players have an OK tuner.
I had a router do that like clockwork, run freeze run freeze. ACN View showed exactly what the lights did. A sub router worked fine. This was in a M...
12X18 is I presume the number and length of the pixel strings. Do you know how many pixels are in the string? Pixels tend to be 50 pixel strings. O...
10 frames/sec will look a little jerky. A smooth fade starts to look good at 24/frames and above. Note there are several items that can affect your ...
Some of the crimp tools are connector specific. To ensure a solid crimp every time, the proper tool, connector, and wire size must match. Grabbing a...
Because Unicast verifies all packets are received, and has handshaking, delays or collisions on the wifi channel can cause the halt and retransmission...
I've had some home routers do that with E1.31 over wireless even when running very few universes. I had to hand pick a router to get one that did wor...
May want to consider a Pi with Falcon Player. It will play the sequence and MP3. Do you have an electronics/robotics hobby shop nearby? You might b...
Normally protection is provided by the current limiting and voltage regulation in the power supply. If you are using a huge power supply, a fuse size...
About the only fixtures that I have seen that regenerate the DMX signal are upper end devices with RDM configuration. All DJ type stuff I have seen s...
If I understand FPP resets the output at the end of a sequence, but I may be wrong and the last valid value is held. Anybody know for sure? The work...
Correction on the color temp please. If you have lots of incandescent bulbs, the above is correct. Unfortunately most LED and pixels are a much cool...
