Tabor
@tabor
Estimable Member
Joined: Dec 24, 2008
Topics: 8 / Replies: 106
Reply
RE: Need a wireless dmx bridge thingy

I have been playing with the same idea, but not using the DMX protocol. I have just used a straight wireless bridge to a a Renard controller. I have ...

18 years ago
Forum
DMX
Reply
RE: Group Buy for SSROZ

Could you tell me the postage to Australia. I will take 20 of the parts only kits if the shipping is decent.

18 years ago
Forum
Reply
RE: 2009 Ren24 Parts Only Group Buy

This is a bit of a trend. Keep the extra.

18 years ago
Forum
Reply
RE: Gran Torino

Would it be "Paint your Wagon"?

18 years ago
Forum
Reply
RE: Slowest comms speed?

Just on a side note. Scorpia do you remember the rf modules we were discussing from Hope. well I finally got around to having a play. At the moment ...

18 years ago
Reply
RE: Slowest comms speed?

I am using a refresh rate of 50ms. I spoke to phil about these speeds a little while back, hoping to get the com speed to a slow enough point that I ...

18 years ago
Reply
RE: Slowest comms speed?

I have been playing with the Ren code at lower speeds. Currently I am running 32 channels at 9600. I have not tried any more channels or any slower s...

18 years ago
Reply
RE: Ren 16 "Aussie BOM"

This could be over come by placing a 317HV before the 7805 to reduce the voltage on the input of 7805. Then there would be no need for an extra trans...

18 years ago
Forum
Reply
RE: Dealings with FUTURELEC

Well maybe Futurlec are monitoring our forum. I placed a fairly large order of triacs, optos, rj45 sockets, and some other gear. I received the items...

18 years ago
Forum
Reply
RE: 16ch Dalington driver board

Hey Matt I was thinking of making something very similar to driver some white leds to create a "sparkle" effect. I was going to run it from somethin...

18 years ago
Forum
Reply
RE: LYNX costs?

The coops for those boards are not run at DIYC. They are on RJ's page.

18 years ago
Forum
DMX
Reply
RE: Printing Directly On Copper

This guy has a blog of his experiences. He has printed on to Copper using a laser, but has various problem with it. I agree that a modified inkjet ma...

18 years ago
Forum
Reply
RE: Printing Directly On Copper

I have seen websites where people have tried to do it, but could not get it to be reliable. Try google.

18 years ago
Forum
Reply
RE: Real Display?

read the comments under the video. the guy that posted the video is called "bboyink" I think they have a led grid on the roof and the laser on the ga...

18 years ago
Reply
RE: Real Display?

I believe it is done using lasers.

18 years ago
Page 6 / 8