Sounds great so far, you are much farther along then I am, and I am sure you will find a whole lot of interest in this project. I am willing to put al...
rlilly wrote:Thanks for this post. I also noticed that the Triks worked perfectly! when I was shutting down the laptop while running the Triks from...
holtm wrote:I noticed much of the same flickering and randomness while connected to my desktop. Most of my errors were on the top first and last 4 row...
Till Christmas, crap!!!!!!!!!!!!!! My Christmas started already! Starting off behind the 8 ball is never a good thing. Hmmmmm let see, if I win the lo...
John2007, I am still here, and still on board. Its been a super nice weekend and will be a nice week, wife has had me devote all my attention to yard ...
I built a brand new one with the same results. Had a few others verify pinout, even ran it through a Cirrus Cable tester and checked the nets
These barely lit columns that came on when I hit play with no frames present, also come on when I unplug the DATA cord from the computer and leave pow...
Ok,, I used the allegro chips. My desktop is custom built with an Intel quad core, with 4gig of RAM on an asus mother board. LPT port has never been u...
Update. I went through all of my wiring and all is correct even the data cable. Grounds are solid as well. The few lines that stayed on during a seq w...
I have a bit of experience with VB and will go to work on it. What version of VB are you using. I hope its not on the .net platform. I agree with John...
I would love to assist in this project if you need the help. I think you should expand upon this a little bit and incorporate message capability and p...
All chips are in correctly and I do have the ground. I found that when I swapped out the controller with one of the other 4 hat it almost works. I can...
ok, I came home and test all the leds, found 2 with bad solder joints, one of which actaully turned on a bunch of others bc of the floating ground. I ...
Josh wrote:i have no experience with LEDtrix, but i know on other Parallel port applications, the port mode can cause issues. try changing it in bios ...
Thats what I figured, but no sense in taking any chances and not double checking. Ok so now that I have cleared that up, made any changes that needed ...
