I know this thread is old but one could try this approach. I have several of these units from other projects Basically it is a solid state media p...
I ordered all the parts from the BOM and had PCB express make my boards but I'm having trouble on where the caps go on the PC interface. The BOM lists...
How many SSRoz's are left? Aaron
DynamoBen wrote:Relax we aren't there yet. Certainly, but I could only get my professor to extend my deadline for the project so long... So for me,...
IT WORKS! KC, Ben, you are both absolutely amazing. I will keep testing and let you know if I discover any bugs but it appears to be working well so f...
I downloaded the Prop PSC plugin, reflashed the original firmware to the Prop, however the plugin did not show up in Vixen... I'm currently running 2....
From what Parallax tells me. Now that I'm able to update the firmware I should be able to enable a "echo" that is similar to how the older board funct...
I was able to re-create the described situation. So long as there are no "on" values in any of the blocks in the Vixen sequence, it will run without a...
Uploaded the new firmware. The green light indicating data now remains constant with Vixen open, however I'm still getting the baud rate error. =/ I c...
I'm slightly confused as to exactly how to flash the new firmware to the unit using the prop tool.
That is odd. In both the PSCI app and the Propeller Tool Program when i query the version number I receive a version 1.0 response. Don't know if that ...
Called Parallax. They said I could update the firmare to tell it to echo commands however I would need a USB to TTL serial level adapter which I don't...
I tried unplugging, plugging it back in then starting Vixen and same issue applies. " Parallax PSC: Could not determine the baud rate for the PSC un...
The parallax app works with board and servos properly. That's how I initially tested it. Just for some reason Vixen will not allow me to put in baud r...
