On a side note related to this discussion, I am more inclined now to say add more controllers and smart receivers as well as power supplies and distro...
The consequence of higher density is more injection, unfortunately. Try to plan your layout and wiring so that the power supplies are reasonably clos...
ben&bobbi wrote:I just did something similar this year. Instead of making the base portable, i just put it in the ground, so the top is flush (or ...
You need to add another control to your testing. That is, light intensity. Different pixels may have different LED's and different current. So, lig...
thangkhungdien wrote:Do we have instruction how to? There is an xEssentials video about audio that talks about a lot of the details. Here is the li...
Dan Kulp has a manual on his website ... it is a little out of date but still relevant.
puppycrack wrote:FWIW: I asked rgbman, wiredwatts & diyledexpress what their wire gauge was and they responded with 20, 20, & 19 respectively. So ple...
The concern I have with the LM2596 style converters from the suppliers in China I have seen on Amazon and Aliexpress is they all appear to use electro...
Jeff Millard wrote:I’m hoping Richard’s suggestion about temps could be the problem I’m having. What temperature do you print at on the hot end and th...
I purchased 2000 5V squares from Ray this year. One failure at about day 10. No fire though and no obvious reason why it failed when I inspected it....
Was it a 12V or 5V pixel? Check out John Spiker's FB page too ... he unfortunately had a pixel fire this season too.
wilmar wrote:Nice I looked at that one too wife gave approval to get for my birthday but after some thought I may wait as I could use a drill press mo...
Kev7274 wrote:I believe I have this coming for my birthday:w00t: Yeah, I looked at that one too and it is very nice. Similar to the TopsCNC excep...
kev wrote:I purchased the 3018 mostly as a learning tool and for PCBs. Not sure if the larger format CNCs can do the finer work required for PCBs. B...
Check out the TopsCNC open source project. I am in the process of putting the "heavy" version together in a 1500mm x 1500mm configuration.
