I will not be using a portable base. I am going to put a permanent base into the ground. I am going to have a 14' mega tree. I will cement a 3' post in the ground that the ASAP Sr main pole goes in. I can cap that off during the off season with a yard decoration. That will leave 7' above ground for the main pole. The inner pole would be extended 7' out to the top (give or take).
My question is whether 3' into the ground is overkill or just right? Is 3' of the inner pole enough to be stable? I will use a 3 or 4 wire stabilization for safety. I am just trying to determine overkill versus safety.
I just did something similar this year. Instead of making the base portable, i just put it in the ground, so the top is flush (or slightly under) with the ground. I had a piece of PVC 4' in the ground that ended up partially filled with concrete. I cut the PVC a little lower in the ground than the base would be. On top of the PVC pipe, i put a galvanized coupler, then a galvanized extension, 6" i think, then the top coupler that the main pole goes into. The top coupler is about at ground level, then when the tree comes down, i will add anti-seize and a galvanized threaded plug. I do have a guy wire attached, and my tree is about 20'.
ben&bobbi wrote:I just did something similar this year. Instead of making the base portable, i just put it in the ground, so the top is flush (or slightly under) with the ground. I had a piece of PVC 4' in the ground that ended up partially filled with concrete. I cut the PVC a little lower in the ground than the base would be. On top of the PVC pipe, i put a galvanized coupler, then a galvanized extension, 6" i think, then the top coupler that the main pole goes into. The top coupler is about at ground level, then when the tree comes down, i will add anti-seize and a galvanized threaded plug. I do have a guy wire attached, and my tree is about 20'.
Do you have any photos of your base you could post here?
Any update on this?
Very interested in doing similar. Looking at the single stage ASAP Sr pole secured into a permanent ground sleeve. Hoping to keep it up year round and use it as a flag pole during the off-season if it doesn't look tacky.
Just curious what material and size people have used for the ground sleeve to hold the 2" rigid conduit used for the asap sr.
Any tips/pics would be appreciated. Also if anyone has put a flag on their asap pole, mounting ideas would be great too... 🙂
-Steve
As ben&bobbi posted I did a very similar thing, because my ground is not level and I wanted the tree to be straight. If you have flat (level) ground, I would encourage you to use the ASAP base, as the pole with the topper mounted can be very heavy to lift, center, and screw on the base, esp. when you get older.
I used 4" PVC outside the the 2" rigid, and glued on threaded caps, so I could screw on a plug that would be virtually invisible during the year.
