David_AVD wrote:The 5V (esxpixel) and 12V (lights) need a common power negative. Well, that did it! Thanks guys! Sent from my SM-G950U using Tapatalk
LightUp wrote:Not my experience. The data line does use 5V signal while the LED power is 12V. Since the data line is unidirectional, is it possible t...
MartinMueller2003 wrote:the data finds the most effective path through the network and do NOT flood back into my home network. FYI: An ARP will set th...
I am not sure I agree that there is limited need for multicast, or that unicast is better. In the normal networking world, unicast is not necessarily ...
frankv wrote:If you really want to control 4 strips from one ESP, you can connect the strips serially, running a data wire from the end of the one str...
pakeonoahu wrote:it uses the UART for the pixel output, if you use other GPIO, WIFI can't function at the same time and cause the ESP to reboot(watchd...
dirknerkle wrote:The boys have worked-up a drop-in PCB adapter that turns the popular and venerable SSRez into a complete, 4-channel Wi-Fi controller!...
Thanks everyone for the help. I m now off to a good start. I am doing some network testing, to determine the actual impact that running this on a home...
jchuchla wrote:you sure you set that up right? 50 pixels x 16 strings x 3 strings x 3 channels per pixel is over 14 universes 2 of the 3 were smaller...
