Awesome. Thanks for the tour. Can you show a close up of how you send the power and signal separately. Do you connect only two leads in the three wire...
Thank you. Will plan this. Today the temperature goes down to -15 in Chicago Sent from my iPhone using Tapatalk
Checked the outputs from the test page. All fine now. Guess cold weather hurts the electronics too. Sent from my iPhone using Tapatalk
Gassy I have not changed the firmware. Do I need to. Right now my challenge is to acesss the San devices page. Typing the IP of 682 is not taking me t...
Thanks for all the help. It does seem to output now but not sure if the colors are good. Controller is still in the yard. Not sure if weather is the c...
Says server is not respondingSent from my iPhone using Tapatalk
Not able to access the page. On it nowSent from my iPhone using Tapatalk
Thank you. All five leds on onSent from my iPhone using Tapatalk
Not yet. Can I do that with the controller still in the yardSent from my iPhone using Tapatalk
All the four led lights inside the controller are on. Does it mean anything.
Thanks Cook. You have such an impressive show. I have only one power supply into the e682 powering the entire board. The power supply is not located ...
Thank you Tony, If you have a photo of the Ray wu dongle or photo of its use in an element , that would be great. Regards
Hi Tony, Thanks for the inputs. Do you have photos of how you inject power over such long distances. Do you use a T for the injection. Also do you r...
