Activity
 
Notifications
Clear all
ptone
@ptone
Estimable Member
Joined: Oct 9, 2010
Topics: 24 / Replies: 111
Reply
RE: Nutcracker 3.0 Released

Thanks Sean for the clarifications. Open source is a great thing, and forks are part of the process, and the licensing can for sure get confusing. S...

14 years ago
Forum
Reply
RE: Nutcracker 3.0 Released

There is something not entirely right about the way this is being done - I don't want to make unfounded accusations, but xLights was developed under a...

14 years ago
Forum
Reply
RE: My new effects system

dirknerkle wrote:Okay, so far I'm seeing some nice effects and an interesting implementation using a tablet. How would one put this into action for 2,...

14 years ago
Reply
RE: My new effects system

Here is the same xy demo but using the kinect as input instead of the iPad. In this case, it is "multi-touch' in that each hand can be controlling its...

14 years ago
Reply
RE: Raspberry pi drives pixels with OLA

Very cool - I'm using a RPI to drive a E680 right now - and it is working pretty well. How many pixels can SPI drive, and at what data refresh rate do...

14 years ago
Reply
RE: Sharing Dimming Curves

JHinkle wrote: You can create them for a single color or for RGB (Note - RGB actually uses three dimming curves so that you can normalize and balance ...

14 years ago
Reply
RE: Sharing Dimming Curves

djulien wrote:Yes, that is the best way to level out the brightness. If you are using custom firmware or plug-in (or a dimming curve if it is RGB-awa...

14 years ago
Reply
RE: Sharing Dimming Curves

Interesting idea - I've been thinking specifically of the color issue as well. For example if you go from red to say - orange or purple, the involvem...

14 years ago
Reply
RE: My new effects system

OK - so here are the results of the color shift added. I found it easier to use the XY pad rather than tilt.The script that generates this effect is ...

14 years ago
Reply
RE: My new effects system

Here is what it looks like when you map a live input to the move-to target of a chase in realtime:In this case this is the accelerometer input from To...

14 years ago
Reply
RE: My new effects system

A roman candle effect:(yes - I intentionally turned the camera). This demonstrates a "spawner" tool - what I'm basically doing is just hammering on t...

14 years ago
Reply
RE: Raspberry PIxel driver.

Barnabybear wrote:It is written in Python. There are quite a few optimizations that could be made here. The most important is to probably only get ...

14 years ago
Forum
Reply
RE: Gamma Correction for 8-bit pixels

Very interesting stuff - I'm using pseudo dimming by applying non-linear dimming curves based on easing curves, but this is at DMX refresh rates. Wha...

14 years ago
Reply
RE: quick 3.0.4 release info question

A couple quick things: I want to be clear that I did not write the spinning cube demo - only linked it as an example of the horsepower enabled by HW ...

14 years ago
Reply
RE: A remote control for light control

There are two projects that are currently pretty code oriented that are going this route of real-time trigger: my own: And another one that has bee...

14 years ago
Forum
Page 2 / 9
Share: