Activity
 
Notifications
Clear all
pmkoch
@pmkoch
Trusted Member
Joined: Dec 9, 2017
Topics: 17 / Replies: 44
Reply
RE: First Mega Tree Questions

K-State Fan wrote:I use 100 pixel count strings for my 50 X 24 tree and use 12 ports on my controller. How do you have each strand configured? Do yo...

7 years ago
Forum
Reply
RE: First Mega Tree Questions

I checked them out but they don't have much in stock. No 12v WS2811 bullets from what I can see.

7 years ago
Forum
Reply
RE: First Mega Tree Questions

I think I have the tree itself worked out now. Now on to wiring questions! I plan on going with 800(50x16) 12v pixels. I will be going with a 16 port ...

7 years ago
Forum
Reply
RE: First Mega Tree Questions

neonexpresso wrote:Handy dandy calculator How do I get it to calculate the length of the pole? I have played around with that but I wasn’t able to...

7 years ago
Forum
Reply
RE: First Mega Tree Questions

mrGrumpy wrote:You are fine with 1-1/2 EMT for the first 10 feet, but 50 pixels at 2” is more like 14-15 feet. Wouldn't 50 pixels at 2” be like 8’ m...

7 years ago
Forum
Reply
RE: First Mega Tree Questions

After more digging it seems like going with the Holiday Coro QuickTree topper(QT8) with a 10’ 1-3/8” top fence rail in the portable hole would be quic...

7 years ago
Forum
Reply
RE: First Mega Tree Questions

Are your strips attached directly to the ground on the bottom? Or is that what used 2-1/2” EMT for?

7 years ago
Forum
Topic
Forum
Replies: 26
Views: 10139
Reply
RE: Vixen 3.6 Generic Serial Port Configuration

Yep, I got the sequence transferred over to FPP and all is well. Thank you!

7 years ago
Forum
Reply
RE: Vixen 3.6 Generic Serial Port Configuration

You are quick! So after I got to thinking, the port configuration I was using was actually when I was testing out an Arduino+WS2811 strands. I was try...

7 years ago
Forum
Topic
Forum
Replies: 4
Views: 4829
Reply
RE: Single bad pixel causing 1/4 of pixels to not work?

David_AVD wrote:Also check that you are sending enough data to the string. It's a little suspicious that the blue isn't working on the last lit pixel...

8 years ago
Reply
RE: Pixel controller for 4 pixel strands

I ended up just using the Falcon PiCap. FPP 2.X made setting up 4 strands on 2 outputs super easy. I will definitely be getting a controller for a meg...

8 years ago
Reply
RE: Pixel controller for 4 pixel strands

superdave wrote:You could probably go with a Falcon F4v3 to get 4 outputs, and use your FPP Pi to be the master control. You would be able to hav...

8 years ago
Page 2 / 5
Share: