Thanks for the suggestions everyone! dcamron wrote:You should be able to run 400 pixels with the PiCap you have. If you only want 4 outputs then you...
Awesome, glad to hear that. That is a great tip about using a standalone PSU for the controller to avoid conflicts. Thank you for your help on this!
So pardon my crummy drawing, but I am just wanting to make sure this would work. Is there a better way to do this? 12V Power Supply +,- to power on ...
Here is a summary from this site: 1) Upload the code I sent you to your Arduino. Make sure you have #define NUM_LEDS 12 set. Also note which COM por...
Jguenther wrote:Here is the video: Disreguard the horizontal pixels at the top of the "drips" I actually took my hanging icigle lights and hung them...
I messaged him through his Aliexpress store and he responded quickly. Like Barnabybear said, make sure you list the quantity of each product and I inc...
Thank you! I have only been using layers for fading, so this really opened a lot of doors for me. I ended up using Alternating with Static Effect Off...
longhenk wrote:is it posible to share that code beccause i cant it in thelink on that page it of line thanks trying to get it work only the test...
A few more questions while I wait for the boards to get in stock. Rob, do you sell the 10W square LEDs on your store or which LEDs do you recommend? ...
Rob, do you know when the 10W WS2811 floods will be back in stock?
mikeh65 wrote:I found these: They have 36" cut points. I Googled "cuttable rope lights 12 inch cut length". Also try 18" or 36" cut lengths. You...
FYI, I ended up getting it to work using the code from: Comparing the 2 files, they look almost identical so I have no idea why that one works and t...
