Last seen: Nov 19, 2026
I just purchased a Baldrick8 to use with adding a new pixel megatree to my display. It's 12 50-pixel (2811) strings in a 180 degree form, with 100 pix...
Yeah, I understand being able to open and edit using notepad and did find the line you mentioned for DMX start channel. In my display setup I need to ...
After trying to figure out how to get the DMX asm file into the assembler (unsuccessfully) I got on the Microchip forums and asked a few questions. It...
Well, back here a whole year later.... I actually did set up the "pix Tree"s exactly as you (braveit1) had mentioned. It seemed like the correct way t...
Thanks everyone for all the comments, I'm just now installing MPLAB on a laptop, jumping in over the next few days to try to get the Renard24 to speak...
Martin, is the assembler part of MPLAB? I've not yet installed and used it but was looking on the Microchip website and only saw MPLAB. They sure have...
I decided to order some new PIC chips instead of re-flashing the ones currently installed on the board, just in case I mess something up in the proces...
That's an interesting thought, but for this year I would like to give changing the PIC code a shot. I see there are 3 PIC chips in this unit... Do a...
Yeah, I was looking again at the address range shown in the comments and it seems to be referring to normal DMX channels so I think I'll just try that...
My board is not the SS24 its just the 'Renard 24' V. 3.3 Rayhjr, I'm looking at the code for the DMX version and see that there is a place to enter t...
Update (a year later...) - I was checking AliExpress again and it appears there is a newer version of this AC dimmer controller that has a "60Hz custo...
Thanks Jeff, that did it! I now have a shortened sequence. There was one extra step I needed to do to make it work, I had to 'select-all' (ctrl-A) bef...
I've followed the instructions as carefully as I could and am still not getting the paste to start at the '0' mark in the new sequence. I've added a m...
