Hey folks,
Dom here from ILightThat, we've built the Baldrick8 Board which are now available worldwide but I want to make sure I'm here to answer any questions or issues people are having in various communities.
I won't link to the vendors here as it's not a sales post but if you need help, let me know.
PM me if you are interested in having ESPixelstick SW running on your platform.
MartinMueller2003 wrote:
PM me if you are interested in having ESPixelstick SW running on your platform.
Thanks, I will be in touch about something we are working on, Whilst we've chosen a different path for the Baldrick8, we've got a few other boards in development that I think it would work well with.
I just purchased a Baldrick8 to use with adding a new pixel megatree to my display. It's 12 50-pixel (2811) strings in a 180 degree form, with 100 pixels being connected per channel, so using 6 of the 8 channels. I'm using Vixen 3.11 for sequencing.
My question is each string of 100 consists of 50 pixels up and 50 pixels down, where is this configured? Is it in Vixen or in the controller? I didn't see a way to do this in the controller but maybe I just missed something...
Happy to report that the Baldrick8 controller appears to work great with Vixen 3.11!
I've been having issues with it (I thought) but finally traced it down to an error on my part configuring the color handling of my new megatree. I had accidentally missed clicking the RGB choice during configuration which messed things up a bit. Once I discovered the error and re-configured it for RGB (and re-patched to the controller channels) it works!
Only thing now is trying to figure out how to get the frame rate up... it's currently only doing 20fps according to the Baldric8's status display (in its web page).
