I purchased some 5v pixels second hand and thought they were just regular WS2811 pixels. The bag indicates they are WS2811
but when I connect to my test 5v controller they just glow a light teal color and the controller will not control the lights. I have attached some images of a pixel along with my normal Ray Wu style 2811s. Hopefully someone can point me in the right direction to identify how to control these pixels.
do they have a slight blue tint in the body plastic? i had a set like that that had the data line marked backwards. almost sent them back until i figured tat out.
No, the ones I can get to work look slightly blue and the wire color is red, green, white. The ones I cannot get to function but glow are pretty clear with red, white and glue wire. I'm going to try to feed from the opposite end and see what happens.
Same result. it seems like these are not WS2811 pixels as the controller doesn't operate them. Well, I'll keep researching.
Ok, this is strange. I decided to try to see if they would work being on the tail end of my one's that work. . . low and behold, they work. . . Well it is a good thing the props i bought that have these pixels are after a mini-tree with my regular pixels. I guess I will test them directly connected to my falcon controller and not through my test PS and controller. interesting. . . .



