Activity
 
Notifications
Clear all
mr fix
@mr-fix
Estimable Member
Joined: Jan 8, 2021
Topics: 5 / Replies: 151
Reply
RE: Do different pixel brands visually vary?

I have pixels from 5 different vendors and brands I don't see any difference in my shows if there is a slight color difference alter the settings in ...

4 years ago
Reply
RE: Do different pixel brands visually vary?

Do a bench test and see if thay look different but they should be the same Sent from my SM-N975U using Tapatalk

4 years ago
Reply
RE: Permanant Christmas Light Mounting Track

Rusty wrote:I'm in Florida as well, I assume your Pex and Led are under the soffit and don't get a lot of direct sun. How has the Pex held up? I like ...

4 years ago
Reply
RE: Pixel vendor confustion

So as for what I have used ALITOVE has been good to me and BTF lighting no failures yet after 3 years and were used every day shows for October and D...

4 years ago
Reply
RE: Pixel vendor confustion

On a side note I use 18 3 extension cords from Walmart 100ft it's $20 500ft for 100ft that's a good deal I think Sent from my SM-N975U using Tapatal...

4 years ago
Reply
RE: Pixel vendor confustion

True Amazon stuff is not 18 awg gut a wire and see they are a lot thinner I will count the strands and post pics when I get home ray has good stuff . ...

4 years ago
Reply
RE: Pixel vendor confustion

$129 for 500 18awg not a bad deal and these have the xConnect Connectors already. Or look for the ones with ray wu Connectors Sent from my SM-N975U ...

4 years ago
Reply
RE: Pixel vendor confustion

TomL8345 wrote:John, I have bought pixels from Wired Watts, Ray, and DIYLEDExpress. The main complaint I have heard from folks who buy elsewhere is ...

4 years ago
Reply
RE: Pixelated image with projector

You have to do a video in the same aspect as video projection mapping you have to build layers on a video precisely and what you don't want to see you...

4 years ago
Reply
RE: ws2811 lighting but cant control

If you look at the strip like this should say 12 v or 5v Sent from my SM-N975U using Tapatalk

4 years ago
Reply
RE: ws2811 lighting but cant control

So I was reading your post again is the ws2811 a 5v strip or a 12v strip what is stamped on the stip Sent from my SM-N975U using Tapatalk

4 years ago
Reply
RE: ws2811 lighting but cant control

I have a set the I got that was labeled wrong I just put the data line on the other end and it worked Sent from my SM-N975U using Tapatalk

4 years ago
Reply
RE: ws2811 lighting but cant control

Any pics of the connection make shore you are on the data line in side. Sent from my SM-N975U using Tapatalk

4 years ago
Reply
RE: Bucking 13.2v

Is there a voltage adjustment screw in the psu Sent from my SM-N975U using Tapatalk

4 years ago
Forum
Reply
RE: Show Me Your Bullet Pixel Mounting for Eaves.

Need to be a 12mm drill bit only no other size works good I tried Sent from my SM-N975U using Tapatalk

4 years ago
Forum
Page 2 / 11
Share: