Hope it's ok to ask here so as to target Pixel users.
I'm almost ready to make my first Pixel purchase. I suspect if I get them from one of the vendors that are often discussed that I'd be safe (i.e. Wally's, WiredWatts, Ray, etc) but there's other vendors out there who seem legit and have good prices. How do I know where NOT to buy short of Amazon JST only Pixels.
For example, had anyone bought from any of these guys?
1. BlinkyPixels.com - I've communicated with them and he seems to know his stuff, says he burns them in 24 hours and has decent prices
2. Yourpixelstore.com - know nothing really about them but they have a sale right now .. 1600 (100 x 16) for $389.99 delivered
3. ???
Any thought or suggestions would be greatly appreciated
PS, is there a time which these guys typically run sales?
John,
I have bought pixels from Wired Watts, Ray, and DIYLEDExpress. The main complaint I have heard from folks who buy elsewhere is that the AWG for the wire is extremely thin and that they have issues with the weatherproofing. Most vendors say their wire is "X" AWG, but it is typically at least a size smaller. Keep in mind pixels are a long-term investment and like most things you get what you pay for. I'm not saying anything bad about the other vendors, but Caveat Emptor...Buyer Be Ware.
TomL8345 wrote:John,I have bought pixels from Wired Watts, Ray, and DIYLEDExpress. The main complaint I have heard from folks who buy elsewhere is that the AWG for the wire is extremely thin and that they have issues with the weatherproofing. Most vendors say their wire is "X" AWG, but it is typically at least a size smaller. Keep in mind pixels are a long-term investment and like most things you get what you pay for. I'm not saying anything bad about the other vendors, but Caveat Emptor...Buyer Be Ware.
Totally agree I am one that has purchased from different places and the wire gauge is a big problem the very good price ones the wires are around 22 awg and some even look like 23 awg possibly 24 awg
And that is thin for lone runs you will need to do a lot of power injection especially with 5v ws2811
The 12v every 100 - 150 nodes and 5v every 50 nodes to get the right color at the end of the string this is withe cheep stuff
No mistake they work but the quality is not as good the epoxy usually has a lot of excessive epoxy slag you will need to clean the nodes on some before you use them on a prop if you making a mega tree not a problem or hanging them but in a 1m hole clean up work.
Look for ones that say 18 awg those are nice wiring and reliability is better
And FYI the Low cost ones don't have waterproof connections they are a very pore none waterproof connection on them and will not last outside.
Sent from my SM-N975U using Tapatalk
$129 for 500 18awg not a bad deal and these have the xConnect Connectors already.
Or look for the ones with ray wu Connectors 
Sent from my SM-N975U using Tapatalk
Remember: Saying they are 18 AWG and being 18 AWG may not be the same. Some do, some don't. Know your supplier.

