mopar99
@mopar99
Trusted Member
Joined: Feb 7, 2014
Topics: 3 / Replies: 80
Reply
RE: New Raspberry Pi unveiled

It will be a stripped down version of windows 10.Sent from my iPhone using Tapatalk

12 years ago
Reply
RE: Setup vixen for e1.31 & komby hardware

Sweet... Thanks again for the help...got it working last night [emoji4] gonna see if I can get a third one going tonight if I have enough partsSent fr...

12 years ago
Reply
RE: Setup vixen for e1.31 & komby hardware

Yes receiver... Sorry 🙂 So if I set receiver 1 to start on 1 and pixel to 50, the receiver 2 to start on 51 with pixel to whatever I like, right? ...

12 years ago
Reply
RE: Setup vixen for e1.31 & komby hardware

Ok, new question... If I want to add a komby... I just need to change the unique id and it should work, right? Sent from my iPhone using Tapatalk

12 years ago
Reply
RE: Setup vixen for e1.31 & komby hardware

Thank you jchuchla! I'll play with it some and see why it was giving me fits.Sent from my iPhone using Tapatalk

12 years ago
Reply
RE: Setup vixen for e1.31 & komby hardware

Well the 510 did it, I had it set to 48. So does it always just need to be set to 510?Sent from my iPhone using Tapatalk

12 years ago
Topic
Replies: 9
Views: 3492
Reply
RE: Komby & Vixen setup help

Ok, think i figured out my issue. think it has to do with vixen software. Using SACNView, I'm able to control the existing setup above via SACN Source...

12 years ago
Reply
RE: Komby & Vixen setup help

What's the difference between RF_IN_Debug_Printing & RF_In_Pixel_out sketch? With debug_printing I can see data coming in to the receiver via the ser...

12 years ago
Reply
RE: Komby & Vixen setup help

Yah, I changed it do to location & network that I was on.Sent from my iPhone using Tapatalk

12 years ago
Reply
RE: Komby & Vixen setup help

Not sure if these are any help receiver transmitterSent from my iPhone using Tapatalk

12 years ago
Reply
RE: Komby & Vixen setup help

try this one I did find some issues but still no luck in getting vixen to send data to change the LEDs.Sent from my iPhone using Tapatalk

12 years ago
Reply
RE: Komby & Vixen setup help

It appears something not set right with vixen. I load sketch rf_in_debug_print and started vixen 3. In the serial monitor, I see -- 0:-- 0 - 30:****...

12 years ago
Reply
RE: Komby & Vixen setup help

komby wrote:Do you have the proper universe setup in vixen and in the e131 sketch? Here a screen shot of vixen: komby wrote:You can rule out vix...

12 years ago
Reply
RE: Komby & Vixen setup help

Ok, I made the changes to the sketch, RF_out_131_in, and it is ping able. In vixen, i set is up of unicast 192.168.10.100, the ip in the sketch above....

12 years ago
Page 1 / 6