Just an FYI that there is an error on your paypal checkout page: "Some required information is missing or incomplete. Please correct your entries and...
I'm interested in 5 SS24s. TimT.
You can always just add extra channels on the end such as 33-35, label them beat tracks, then reorder them to be mixed throughout Vixen. I always fin...
Very cool. Next years should have a DIY Calendar board and holes strategically drilled to poke the LEDs through so it will light up!
I can confirm too that 240 Renard channels on 1 serial port are working on 50ms!
I would reinstall the driver and make sure that you are matching up with the correct port using the bitrate that would match the Programming on the PI...
fkostyun for the WIN!!!!! The LOR cable is the culprit. the 20071229.hex works at 57600 for both RS232 and another RS485 adapter I have. I have tr...
We have Blink for the WIN!!!! I reprogrammed using 57600 with RS232 direct connection and we are good. On to get 115200 and RS485 working.
Yes, I was thinking the same thing, but I would think that the Green light from diag code working would indicate the pin-out was correct. Either way,...
oh, and I tried this on multiple Ren24s (4 of the 10 I built). I'm pretty sure it's down to me and my abilities to program PICS.
Well, still no luck. Here is my setup: COM4 - USB-RS485 converter I used on LOR to a cat 5 cable going to the COMM in on the REN24. Diag code I com...
o.k. Diagnostic programmed PICS give Green when I loop a one second on-one second off sequence. When I slide in the Renard-20071229.HEX code, it's no...
When diag firmware is programmed on the pics. . Do you mean that vixen is running a sequence to be good data. I.e. What is the definition of "good dat...
