The two-prong cords, since I have two into each renard (each at 15 amps), my best guess is that one or both were flipped when he made the connections....
Btw. Just in time. My show starts at 6 and they have been working for an hr!Sent from my iPhone using Tapatalk
Thank you all! So, After my posting, I went back and thought about it and realized that my helper son flipped the plugs on me! We are running in the...
Ok. So I ran power from the gfi to the renard and it still triggered!! Did not matter if I only plugged the top or the bottom or in a diff gfi outlet...
mrGrumpy wrote:Nice setup, you should have all the GF covered, but you still got a trip.....hmmmm You said you popped both receptacles were these ...
MikelMD wrote:So, my setup is from the elect panel (in side the house), I have dedicated circuits to an outside GFI power strip or panel (see pixs). ...
So, my setup is from the elect panel (in side the house), I have dedicated circuits to an outside GFI power strip or panel (see pixs). Now, from the...
All, As expected, a dry day, no little creatures chewed any wires, checked the outlet for the correct setup (hot/grd/neut) and all looked good. All...
Mr Grumpy, Tonight, using a receptacle tester, I confirmed that my GFI outlets are "correct". That leaves the run from the GFI switch to the Renard ...
Mr Grumpy, That was my concern as well. I had no show lights on, and I was triggering a fault. Next day, I checked the wires for any critter meals an...
Thanks Jason. I needed some things to think about, from another perspective. Btwn tmr and Saturday, the first official day of lighting I plan on using...
OMG! Thank you Nick and Jon! That did the trick -always learning. Have a wonderful Thanksgiving!
Any pix? How d u remove it after the show?Sent from my iPhone using Tapatalk
