Hi Kwdelre, So this year I d/l the three skits and used them for my 10 year anniversary for doing lights. All this time I had said that some guy nam...
So, today I unplugged the PC and I only have the PiCap running and thus far, the "light only show" is not blinking to cause nausea! At 6pm, the lights...
jchuchla wrote:Mine too. I always had an offset in FPP, but i discovered a recent FPP update had set the offset back to 0. In my system, I found -35...
Ruppro wrote:Understand that only FPP is running the show, From what you describe and the Video, was Vixen open at all? It is always sending to the co...
MikelMD wrote:Ok - so export from the released version and NOT the latest Dev Build. - doing that now. Nope. Only FPP ran the show. - Updated Vixen...
Popo-B-Trippin wrote:Issue 1; This has been fixed with the latest update. Download the current version and you'll be good to go Issue 2; Did you happ...
StickyWicket wrote:Can you post pictures of your dimming curves? If you are dimming both in Vixen and on the controllers you’d be dimming twice. Usual...
Aurbo99 wrote:are you using 3.7u2? It is the latest Dev Build #999
StickyWicket wrote:You should be able to use the Megatree Smart Object. If you are having trouble making it smaller with the mouse try typing the numb...
WAIT! I have been searching for a FB group for Vixen Light users and found one - however, it is not used. If there is one (the previous link seemed ...
jchuchla wrote:No. On the falcon boards, the ethernet ports are the metal shielded jacks in the upper left of the board. those two ports are interch...
jchuchla wrote:Correct. Strictly speaking, you cannot daisy chain ethernet connections. Each ethernet device needs to be connected to its own port o...
