Hey all, I know this isnt Grinch related but I wanted to say that I picked up some new resistors locally (as it says above, I used 680k ohm istead of ...
IT WORKS!!!!! 😀 😀 . It was kind of funny, I yelled to my wife and shes like "what" in a panic and I was just so happy that my grinch worked haha. l...
Ok, I made my tester and lowered my voltage to the board to 4.47vdc from 5.29vdc using the IN4001 diode that Wayne J suggested and I still don't have...
yup I guess I'll have to wait until they arrive because radio shack doesn't carry bulk amounts. I guess I'll spend some of today making sure the Grin...
just figured out why my SSRs arent working......I double checked my parts and I accidentally ordered a 680K ohm resistor istead of a 680 ohm resistor...
Ok I have been playing with my multimeter and the input from the parallel port. If you go by the grinch controller construction notes v1.0 they go l...
Power supply was an extra wall ACDC adapter laying around it is a Phihong model: PSCO5R-050 it says output is5v 1.0 A max. It also says it is a switc...
OK I know I have the cable correct and Still no luck. Any other ideas. The Light on the SSR does not light up at all. Is that supposed to light to sho...
ok, I believe the correct one is the DB25 male. The top one, where the pin 1 is on the left if your looking at it straight on.) In this link below.
OK I changed the plug in from simple 595 to Olsen 595 and it was already set to EPP in the bios. Actually in the bios there were several choices with...
Thanks for all the help, I am still interested in the Lynx though and I will check back to see the status Thanks, Mike
Hi, I am new to the lighting controlling world and would like to have a fairly simple Christmas light display this winter. Do you think this would be ...
