Grinch communicatio...
 
Notifications
Clear all

Grinch communication problems/questions.

28 Posts
7 Users
0 Reactions
12.9 K Views
Posts: 14
Topic starter
(@mberghi)
Active Member
Joined: 19 years ago
[#961]

Hi all,
I'm a newbie to lighting control and I just finished building a Grinch and am having trouble getting it to work with vixen. Is there a way to easily check to see whether it is communicating with your PC and/or Vixen. I have it set for "Simple 595." Is there another plug in I should use instead?
Another question and I know this is in the wrong section but I just finished my first few SSRs and they are not working either, (LED is not lighting up and not sequencing lights) It is this design:
http://doityourselfchristmas.com/wiki/index.php?title=4_Channel_SSROZ_Assembly_Instructions
Any help would be greatly appreciated
Thanks,
Mike
P.S. oh and I am using a "5v DC 1.0 amp max" power supply and the LED lights up on the grinch board.


27 Replies
Mudsculpter
Posts: 1216
Admin
(@mudsculpter)
Member
Joined: 19 years ago

Use the "Olsen 595" and see if that helps

Use "EPP" as the port setting in the BIOS


Reply
Posts: 14
Topic starter
(@mberghi)
Active Member
Joined: 19 years ago

OK I changed the plug in from simple 595 to Olsen 595 and it was already set to EPP in the bios. Actually in the bios there were several choices with EPP. I will list the choices:
EPP1.9+SPP
EPP1.9+ECP
EPP1.7+SPP
EPP1.7+ECP
Printer
SPP
ECP
I believe mine is on the EPP1.7+ECP, but does that matter? Is there a way to put my multimeter on different parts of the board to see if it is getting a signal? or the RJ45 plug coming from the PC's parallel port?
Thanks,
Mike
P.S. oh and it is still not working


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

The first thing to check and double check, is the cable from the paralell port to the controller. This cable is real easy to get the pin connections in the wrong order. Make sure this cable is correct before any other trouble shooting is done. 😉


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Here is the pin out of the Grinch

(click for full size)


Reply
Page 1 / 6
Share: