Max-Paul
@max-paul
Estimable Member
Joined: Jan 6, 2013
Topics: 3 / Replies: 106
Reply
RE: What USB switch to use?

read this thread. This has great info from others who have tested the items to see if they are compatible. I just bought the Plugable model USB2-HUB...

12 years ago
Reply
RE: 12v power supply wire reccomendation

jeffl wrote:Not sure why I was stuck on 10awg wire. For the lengths of runs I'm doing, it looks like I can use something a little smaller. Jeff, whe...

12 years ago
Reply
RE: New to LOR and DMX... Help! Explain Please

Just recently I have been looking into this LOR controllers using DMX to control them. So any of you guys that have been doing this for awhile correct...

12 years ago
Forum
Reply
RE: Ray Wu TM1809 flex strips - red led issues

I'm sorry, what I was asking is was there any change in wire lengths from when it was outside and now that you are testing inside. I along with many o...

12 years ago
Reply
RE: Ray Wu TM1809 flex strips - red led issues

Are any of the leads shorter? from power supply to controller, or controller to the matrix? Red LEDs operate at a lower voltage. If the voltage gettin...

12 years ago
Reply
RE: Someone validate my pixel power math please

Looks like you got it all figured out. Math looks good. 80% at full load is good to go. Cause you wont be at full load all of the time. Might of fact...

12 years ago
Reply
RE: Using Standard 2 and 3 core wire outside between controller and pixels

Hydro, I am sorry if my post came off a little strong to you, being a newbie. I have posted similar post about this strange language in the past and h...

12 years ago
Reply
RE: Using Standard 2 and 3 core wire outside between controller and pixels

pmcpa wrote:Actually, if you've ever worked with the low voltage or data side of things, the term cores is used a lot.... Way to make the new guy fee...

12 years ago
Reply
RE: Using Standard 2 and 3 core wire outside between controller and pixels

Well I'll tell you what gentlemen and haters. If we all just jump on each and every bandwagon. Then it wont be long before we as a people will not be ...

12 years ago
Reply
RE: Using Standard 2 and 3 core wire outside between controller and pixels

Tell me folks. When you go to the electrical supply store or a hardware store and you tell the nice person who works there " hey mack, where do you ke...

12 years ago
Reply
RE: E6804 Issue, killing me 🙂

pmcpa wrote:You don't need it replaced, if you have a prop plug, just re-flash it, or send it to one of us that does and we can flash it for you Eve...

12 years ago
Reply
RE: E6804 Issue, killing me 🙂

PMCPA hit the nail on the head. Was just what I was about to post myself. Swap and see if the problem follows the wiznet or the EEPROM. I am betting o...

12 years ago
Reply
RE: Failure rate?

I bought some WS2811 12V strips in the spring of 2013. During the display that winter I lost several of the individual 3" sections. I found a group o...

12 years ago
Reply
RE: Technicolor Pixels ARE NOT FIXED

nutz4lights wrote:Deon, I'll be curious to see what your tests show, since, the reason almost all commercial grade LED (non-rgb) strings are sealed (n...

12 years ago
Reply
RE: Are any of these hackable

These: usually meaning more than one item. If only one item it is "Is this hackable?" Yes there are 120 bulbs. but only one string.

12 years ago
Forum
Page 2 / 8