For your first suggestion, take a look at the boolean paste functions, or ctrl+down/up I would definitely like your second suggestion! Vixen post-it...
The diodes are wired correctly. My Ren-T is wired to the schematic in Wayne J's post. I did another test on my Line In port this time and got this.....
Ignore my last post. I noticed that I got about the same results whether the ends were hooked to anything or not. Turns out that I had the wrong aud...
I'll give it a try later today. -Matt
Well, I tried out the makeshift oscilloscope and I got this. This is from the Q1 side of R9. Can anyone tell me what to make of this? Thanks, -Matt
Any other ideas? Since I'm in a pinch... Could I use my sound card as a scope, similar to this: How much in current limiting resistors would I nee...
Do you have the sequence playing at normal speed? Is your computer fast enough to handle Vixen? -Matt
Yes. -Matt
Yes, power (+) and ZC are on 7/8. I was thinking the same thing - I wish I had an oscilloscope, but I don't. Any other advice? -Matt
You'll probably have problems with lights, extension cords, and GFCIs before you have water problems with that. Unless you throw it in a lake or some...
I can't explain groups, I'm not sure myself exactly how to use them. A profile can store data such as... -Channels -Channel Order -Channel Colors -P...
