Activity
 
Notifications
Clear all
matt_65
@matt-65
Eminent Member
Joined: Oct 21, 2008
Topics: 4 / Replies: 26
Reply
RE: Problem with no output data from Grinch

I admit defeat, I give up, this is so frustrating. I have shortened the data cable from the PC to the grinch, it is now just a little over 8" long. ...

14 years ago
Forum
Reply
RE: Problem with no output data from Grinch

Ok, dug up an old PC spent the day installing OS and getting Vixen to run, ran thought the different parallel port modes (ECP 1.7, ECP 1.9, EPP, ECP+E...

14 years ago
Forum
Reply
RE: Problem with no output data from Grinch

Thanks, I'll see if I can get my hands on another computer with a parallel port and see if that fares any better. It is an old PC so it is feasable s...

14 years ago
Forum
Reply
RE: LED Christmas Lights China Supplier

I would be interested in some strings, I would prefer 24VAC just because that is what most of mighty are at the moment. Also like the look of some of ...

14 years ago
Reply
RE: Problem with no output data from Grinch

Thanks for the quick response. I put a 1N4004 (they didn't have the 1N4001 available), and the input voltage has dropped to about 4.4V, but apart fr...

14 years ago
Forum
Topic
Forum
Replies: 6
Views: 15551
Reply
RE: Light is turning on out of synch with the program

It turns out the issue with the stars and the other lights were related to a faulty Allegro IC, replaced IC2 on the Grinch and most is happy. I have ...

14 years ago
Forum
Topic
Forum
Replies: 2
Views: 10390
Reply
RE: 24VAC with the SSRoz

@LightUp, thanks for that, makes sense that it will only draw what it needs.

14 years ago
Forum
Reply
RE: 24VAC with the SSRoz

Great, thanks for the information and confirmation. Do I have to be concerned or do anything at all about the 12A the toroids generate? Will the SSR...

14 years ago
Forum
Topic
Forum
Replies: 6
Views: 3704
Reply
RE: SSROZ not powering lights

OK, swapped out the 360k ohm resistors for 360 ohm resistors and I now have blinky 🙂 Thanks to Brian and everyone else for your assistance with my p...

15 years ago
Forum
Reply
RE: SSROZ not powering lights

budude wrote:It looks to be brown which would make this a 3600 ohm resistor. Had the Mrs read the bands for me, the colours are Orange, Blue, Black,...

15 years ago
Forum
Reply
RE: SSROZ not powering lights

Thanks Brian, I am sure I checked the resistance of those the other day, but will check them tonight. Resistors are my weekest link, I am colour bli...

15 years ago
Forum
Reply
RE: SSROZ not powering lights

I have attached a photo of the SSR, my setup is packed up at the moment so will need to get the measurements tomorrow night. Thank you for your time...

15 years ago
Forum
Page 1 / 2
Share: