Ray wu already sells the seed pixels in a clear tube. But it's a round tube (not with a flat side like your pictures).
Chrisgeorge0911 wrote: Thanks Mark. it was just a dodgy pixel in the end (see my previous reply) that seems to have not been passing the data through...
I've modeled in both Fusion 360 & Solidworks. I prefer Solidworks more as a software but SW is expensive. You would be better off with a free & open s...
There should also be a rubber o-ring on the female side (one with the screw nut). With the rubber o-ring and compression of the threaded screw it is w...
You have some pixels defined on port 2, which would allow for something in test mode. Maybe port 2 has the brightness configured to 0%? (Out of view t...
Are you using clock wire pebbles? Or the ws2811 3 wire seed pixels (China vendors copy the name for a totally different pixel type). I'd first check w...
I'll add to the 2yr old thread. Back 2 years ago I started mounting a panoramic CCTV camera to my neighbors fence post. They offer power and I use a ...
I wouldn't even consider using an Arduino for pixels now days. An ESP8266 or ESP32 running WLED or ESPixelStick code is already made. Both firmware ha...
Jrossi3334 wrote: I was thinking of sending him an email about it. Ill have to find his address on here. ray@rita-light.com
DigQuad for the mega tree should work. I run 3 ports of 800 pixels for my mega tree (2,400 pixels) and the 4th port does my 166 pixel star. Limited t...
I've got no idea about the name. Maybe Ray Wu (Rita lighting) would be willing to sell you just the sleeves.
Depends on your climate. In New Zealand/Australia it is summer in December. Most boxes have vents to avoid over heating. In the northern hemisphere yo...
Goneferal wrote: The dmx controller box and a USB to cable is working great! So much better than my old set up. I just loaded the dmx cable driver and...
2 cents added like others, WLED or ESPixelStick firmware running on an ESP32 will do what you want. Cheap as chips to buy a development ESP32 board of...
The WS2814 chip has 4 outputs. 32/4 = 8 of these WS2814 chips. WS 28 1 1 World Semi Protocol 0 - Clock wire 1 - 3ch chip extern...
