I'll sub to follow along. I use PoE daily as a network admin. I have often thought of trying to design a PoE switch meant for controlling and poweri...
wilmar wrote:try this 4" Thank you so very much! I will get this to my buddy to get printed! No idea how you did it, but thank you again!
Thank you! You can send it to a zip file in windows and then upload it to the forum. That’s how I did it. I have 4” spaces strings 🙂
Bwinter wrote:Yes. Just make sure you don’t overload the capacity (wattage) of the PSU. thank you
DaleP wrote:2" of travel, but your forgetting to subtract the length of that stepped drill bit. Hold a tape measure on the drill press and see how muc...
I may try this from harbor freight instead of this wood jig I tried to make
Maybe the jig is just too big. I have the depth set to max. I can drill through the pipe if I rest the bit on the bit then press. Problem is, if I do ...
@sporadic that is a super clean window with super easy on/off and a single pigtail. Lovin it!
Good find! Thank you. That middle one on the bottom will do. Thanks.
Pretty much decided on DIYLEDexpress for pixels. Looking at 18awg; 12V regulated, pixels as well as some 5V pixels in both bullets and squares. I ma...
I emailed HolidayCoro to ask them about a 4" spacing version and they replied to me and told me to switch to 3" spacing then recommend a bunch of item...
