I am just getting back into things after about 12 years. I have some old Vixen sequences from 2006 that would be from Vixen 1. I'd be very appreciativ...
Nevermind, I took all the wires I soldered for power and antenna off of the board, and I soldered thicker wires in their place. I also connected it t...
I was trying to get this up and running to test it out today, so I went ahead and soldered the cable between the boards, according to the labels. I u...
If you could post a picture of the two boards where they are connected to each other, this would clear up my confusion. I am sorry for asking all of ...
Just curious about something with this transmitter. I know someone said that the silk screen for the buttons is backwards, so I am curious if it is a...
Oops, sorry about that, I did search around, but some how missed that. Anyway, that answers most of my questions, but there are still 3 solder points...
I have a question about hooking up an antenna to the transmitter pictured below. As you can see, the transmitter has ground and antenna marked for RF...
rca wrote:I have one of the 200mW transmitters as well. I've been looking this weekend for some 50ohm coax to use with it, but I came up empty. One ...
I have another question about the ground plane antenna. When measuring the length of the elements, do you include the connector, or do you start from...
