I've seen POE devices that allow 1A at 12V. Like this one:
Cheap LED strings have half of the string with LEDS aimed in one direction and the other half in the opposite. So half of the string is lit on the pos...
Ah yes, that's what I did on the first version of the board. I'll try to find a happy medium 🙂
I added the ability to change the frequency: #include <iostream> #include <sys/io.h> #define base 0x378 using namespace std; int timeo...
Here is the code I wrote to test the capability of a software generated PWM signal. This is at 250hz #include <iostream> #include <sys/io.h&...
Mike, Thank you for the advice. This is by far the most complicated PCB I've designed so your advice is much appreciated. - I'll likely just remo...
FWIW, I plan on running all of my channels on 12VDC. I've started converting all of my AC led strands to run on 12VDC power. I found that putting a re...
Mike, Thanks so much for pointing out the 5916. I'm going through the datasheet now and it's peaked my interest. The ability to adjust output gain is...
I'll write up a quick C program for testing. Tomorrow I'll bring my laptop to class and hook it up to a scope and check on the consistency and accurac...
Ultimately, I will not be using a C program to control dimming. It will be a Vixen plugin. I've recruited some assistance in designing the plugin, bec...
Thank goodness for the wiki. I almost broke the search button. 😀
Try apt-get install libmono-winforms2.0-cli
