LightUp wrote: Vixen doesn't accept COM ports above 4, as I understand it. Therefore you will have to pick a free COM port on your computer that is 4 ...
jwhitelights wrote: 3)com 7, vixen wount let me select on it just says 'no device connected' The reason these details are good from the beginning. ...
With the previous code all we want to do is upload to arduino and then open the serial monitor. Set your serial monitor to 115200 and turn line end ...
OK, I'm going to start scanning your code but for now copy the code below to and upload it to your arduino /*======================================...
Also paste the the code your currently using so we can see if there's anything that stands out as a possible issue
O.K. Sorry I had to step away last night but if your ready we can try to get you up and running now. Give me a few minutes and I'll post an arduino...
timon wrote:These are so cheap why not just pot them and be done with it. My OCD just likes putting things snugly inside other things with lids 🙂
jlowe wrote:Less talk, more action! Dates, times, agenda! I'm ready to order parts and be a good pupil! Ha, your right, Back on track! I'm puttin...
Also, what are you trying to control from the mega based on Vixen data? (LEDs, relays, SSR)
Hey jwhitelights. I'll try to help but we're going to need some more details to be effective. 1. What method of serial communication are you tyring...
pmscientist wrote:Fair enough. OTOH, if ZC isn't covered, perhaps reffering to it as SSR control isn't the best title for the topic? I will definite...
brainstorming in a modified direction.
See post above that apparently went up while u were typing almost the same 🙂
jdc928 wrote:I should have elaborated more on the cable glands. The only area I really saw a purpose for a cable gland was on the cat5 jack (possible...
jchuchla wrote:Nice design. But, is it really worth the effort? I'm all for cool designs, but I also believe in the KISS method. Mine are all in ...
